twisted.conch.recvline.TransportSequence

class documentation

class TransportSequence: (source)

Constructor: TransportSequence(*transports)

Implements interfaces: twisted.conch.insults.insults.ITerminalTransport

View In Hierarchy

An ITerminalTransport implementation which forwards calls to one or more other ITerminalTransports.

This is a cheap way for servers to keep track of the state they expect the client to see, since all terminal manipulations can be send to the real client and to a terminal emulator that lives in the server process.

Method __init__ Undocumented
Method applicationKeypadMode Cause keypad to generate control functions.
Method cursorBackward Move the cursor left n columns.
Method cursorDown Move the cursor down n lines.
Method cursorForward Move the cursor right n columns.
Method cursorHome Move the cursor home.
Method cursorPosition Move the cursor to the given line and column.
Method cursorUp Move the cursor up n lines.
Method deleteCharacter Delete n characters starting at the cursor position.
Method deleteLine Delete n lines starting at the cursor position.
Method doubleHeightLine Make the current line the top or bottom half of a double-height, double-width line.
Method doubleWidthLine Make the current line a double-width line.
Method eraseDisplay Erase the entire display.
Method eraseLine Erase the entire cursor line.
Method eraseToDisplayBeginning Erase from the cursor to the beginning of the display, including the cursor position.
Method eraseToDisplayEnd Erase from the cursor to the end of the display, including the cursor position.
Method eraseToLineBeginning Erase from the cursor to the beginning of the line, including the cursor position.
Method eraseToLineEnd Erase from the cursor to the end of line, including cursor position.
Method getHost Similar to getPeer, but returns an address describing this side of the connection.
Method getPeer Get the remote address of this connection.
Method horizontalTabulationSet Set a tab stop at the current cursor position.
Method index Move the cursor down one line, performing scrolling if necessary.
Method insertLine Insert n lines at the cursor position.
Method loseConnection Close my connection, after writing all pending data.
Method nextLine Move the cursor to the first position on the next line, performing scrolling if necessary.
Method numericKeypadMode Cause keypad to generate normal characters.
Method reportCursorPosition Return a Deferred that fires with a two-tuple of (x, y) indicating the cursor position.
Method reset Reset the terminal to its initial state.
Method resetModes Reset the given modes on the terminal.
Method resetPrivateModes Reset the given DEC private modes on the terminal.
Method restoreCursor Restore the previously saved cursor position, character attribute, character set, and origin mode selection.
Method reverseIndex Move the cursor up one line, performing scrolling if necessary.
Method saveCursor Save the cursor position, character attribute, character set, and origin mode selection.
Method selectCharacterSet Select a character set.
Method selectGraphicRendition Enabled one or more character attributes.
Method setModes Set the given modes on the terminal.
Method setPrivateModes Set the given DEC private modes on the terminal.
Method shiftIn Activate the G0 character set.
Method shiftOut Activate the G1 character set.
Method singleShift2 Shift to the G2 character set for a single character.
Method singleShift3 Shift to the G3 character set for a single character.
Method singleWidthLine Make the current line a single-width, single-height line.
Method tabulationClear Clear the tab stop at the current cursor position.
Method tabulationClearAll Clear all tab stops.
Method unhandledControlSequence Called when an unsupported control sequence is received.
Method write Write some data to the physical connection, in sequence, in a non-blocking fashion.
Method writeSequence Write an iterable of byte strings to the physical connection.
Constant BACKSPACE Undocumented
Constant TAB Undocumented
Class Variable execBytes Undocumented
Class Variable execStr Undocumented
Instance Variable transports Undocumented
def __init__(self, *transports): (source)

Undocumented

def applicationKeypadMode(self): (source)
from twisted.conch.insults.insults.ITerminalTransport

Cause keypad to generate control functions.

Cursor key mode selects the type of characters generated by cursor keys.

def cursorBackward(self, n=1): (source)
from twisted.conch.insults.insults.ITerminalTransport

Move the cursor left n columns.

def cursorDown(self, n=1): (source)
from twisted.conch.insults.insults.ITerminalTransport

Move the cursor down n lines.

def cursorForward(self, n=1): (source)
from twisted.conch.insults.insults.ITerminalTransport

Move the cursor right n columns.

def cursorHome(self): (source)
from twisted.conch.insults.insults.ITerminalTransport

Move the cursor home.

def cursorPosition(self, column, line): (source)
from twisted.conch.insults.insults.ITerminalTransport

Move the cursor to the given line and column.

def cursorUp(self, n=1): (source)
from twisted.conch.insults.insults.ITerminalTransport

Move the cursor up n lines.

def deleteCharacter(self, n=1): (source)
from twisted.conch.insults.insults.ITerminalTransport

Delete n characters starting at the cursor position.

Characters to the right of deleted characters are shifted to the left.

def deleteLine(self, n=1): (source)
from twisted.conch.insults.insults.ITerminalTransport

Delete n lines starting at the cursor position.

Lines below the cursor are shifted up. This command is ignored when the cursor is outside the scroll region.

def doubleHeightLine(self, top=True): (source)
from twisted.conch.insults.insults.ITerminalTransport

Make the current line the top or bottom half of a double-height, double-width line.

If top is True, the current line is the top half. Otherwise, it is the bottom half.

def doubleWidthLine(self): (source)
from twisted.conch.insults.insults.ITerminalTransport

Make the current line a double-width line.

def eraseDisplay(self): (source)
from twisted.conch.insults.insults.ITerminalTransport

Erase the entire display.

def eraseLine(self): (source)
from twisted.conch.insults.insults.ITerminalTransport

Erase the entire cursor line.

def eraseToDisplayBeginning(self): (source)
from twisted.conch.insults.insults.ITerminalTransport

Erase from the cursor to the beginning of the display, including the cursor position.

def eraseToDisplayEnd(self): (source)
from twisted.conch.insults.insults.ITerminalTransport

Erase from the cursor to the end of the display, including the cursor position.

def eraseToLineBeginning(self): (source)
from twisted.conch.insults.insults.ITerminalTransport

Erase from the cursor to the beginning of the line, including the cursor position.

def eraseToLineEnd(self): (source)
from twisted.conch.insults.insults.ITerminalTransport

Erase from the cursor to the end of line, including cursor position.

def getHost(self): (source)
from twisted.internet.interfaces.ITransport

Similar to getPeer, but returns an address describing this side of the connection.

Returns
An IAddress provider.
def getPeer(self): (source)
from twisted.internet.interfaces.ITransport

Get the remote address of this connection.

Treat this method with caution. It is the unfortunate result of the CGI and Jabber standards, but should not be considered reliable for the usual host of reasons; port forwarding, proxying, firewalls, IP masquerading, etc.

Returns
An IAddress provider.
def horizontalTabulationSet(self): (source)
from twisted.conch.insults.insults.ITerminalTransport

Set a tab stop at the current cursor position.

def index(self): (source)
from twisted.conch.insults.insults.ITerminalTransport

Move the cursor down one line, performing scrolling if necessary.

def insertLine(self, n=1): (source)
from twisted.conch.insults.insults.ITerminalTransport

Insert n lines at the cursor position.

Lines below the cursor are shifted down. Lines moved past the bottom margin are lost. This command is ignored when the cursor is outside the scroll region.

def loseConnection(self): (source)
from twisted.internet.interfaces.ITransport

Close my connection, after writing all pending data.

Note that if there is a registered producer on a transport it will not be closed until the producer has been unregistered.

def nextLine(self): (source)
from twisted.conch.insults.insults.ITerminalTransport

Move the cursor to the first position on the next line, performing scrolling if necessary.

def numericKeypadMode(self): (source)
from twisted.conch.insults.insults.ITerminalTransport

Cause keypad to generate normal characters.

def reportCursorPosition(self): (source)
from twisted.conch.insults.insults.ITerminalTransport

Return a Deferred that fires with a two-tuple of (x, y) indicating the cursor position.

def reset(self): (source)
from twisted.conch.insults.insults.ITerminalTransport

Reset the terminal to its initial state.

def resetModes(self, mode): (source)
from twisted.conch.insults.insults.ITerminalTransport

Reset the given modes on the terminal.

def resetPrivateModes(self, modes): (source)
from twisted.conch.insults.insults.ITerminalTransport

Reset the given DEC private modes on the terminal.

def restoreCursor(self): (source)
from twisted.conch.insults.insults.ITerminalTransport

Restore the previously saved cursor position, character attribute, character set, and origin mode selection.

If no cursor state was previously saved, move the cursor to the home position.

def reverseIndex(self): (source)
from twisted.conch.insults.insults.ITerminalTransport

Move the cursor up one line, performing scrolling if necessary.

def saveCursor(self): (source)
from twisted.conch.insults.insults.ITerminalTransport

Save the cursor position, character attribute, character set, and origin mode selection.

def selectCharacterSet(self, charSet, which): (source)
from twisted.conch.insults.insults.ITerminalTransport

Select a character set.

charSet should be one of CS_US, CS_UK, CS_DRAWING, CS_ALTERNATE, or CS_ALTERNATE_SPECIAL.

which should be one of G0 or G1.

def selectGraphicRendition(self, *attributes): (source)
from twisted.conch.insults.insults.ITerminalTransport

Enabled one or more character attributes.

Arguments should be one or more of UNDERLINE, REVERSE_VIDEO, BLINK, or BOLD. NORMAL may also be specified to disable all character attributes.

def setModes(self, modes): (source)
from twisted.conch.insults.insults.ITerminalTransport

Set the given modes on the terminal.

def setPrivateModes(self, modes): (source)
from twisted.conch.insults.insults.ITerminalTransport

Set the given DEC private modes on the terminal.

def shiftIn(self): (source)
from twisted.conch.insults.insults.ITerminalTransport

Activate the G0 character set.

def shiftOut(self): (source)
from twisted.conch.insults.insults.ITerminalTransport

Activate the G1 character set.

def singleShift2(self): (source)
from twisted.conch.insults.insults.ITerminalTransport

Shift to the G2 character set for a single character.

def singleShift3(self): (source)
from twisted.conch.insults.insults.ITerminalTransport

Shift to the G3 character set for a single character.

def singleWidthLine(self): (source)
from twisted.conch.insults.insults.ITerminalTransport

Make the current line a single-width, single-height line.

def tabulationClear(self): (source)
from twisted.conch.insults.insults.ITerminalTransport

Clear the tab stop at the current cursor position.

def tabulationClearAll(self): (source)
from twisted.conch.insults.insults.ITerminalTransport

Clear all tab stops.

def unhandledControlSequence(self, seq): (source)
from twisted.conch.insults.insults.ITerminalTransport

Called when an unsupported control sequence is received.

Parameters
seq:strThe whole control sequence which could not be interpreted.
def write(self, data): (source)
from twisted.internet.interfaces.ITransport

Write some data to the physical connection, in sequence, in a non-blocking fashion.

If possible, make sure that it is all written. No data will ever be lost, although (obviously) the connection may be closed before it all gets through.

Parameters
dataThe data to write.
def writeSequence(self, data): (source)
from twisted.internet.interfaces.ITransport

Write an iterable of byte strings to the physical connection.

If possible, make sure that all of the data is written to the socket at once, without first copying it all into a single byte string.

Parameters
dataThe data to write.
BACKSPACE: bytes = (source)

Undocumented

Value
b'\x7f'
TAB: bytes = (source)

Undocumented

Value
b'\t'
execBytes = (source)

Undocumented

execStr = (source)

Undocumented

transports = (source)

Undocumented