Create a constant-radius round surface between two surfaces.

Lengthen a surface by a value.

Create a ruled surface between two surface edges.

Create a round tangent surface between two surface edges with varying radius values.

Create a blend surface between surface edges with varying radius values.

Create a chamfer surface between surface edges with varying distance values.

Create a blend surface between two surfaces with continuity control.

Copy a surface parallel to the original.

Copy a surface specified varying distances from the original surface.

Set the tangent direction of an untrimmed surface.

Adjust a surface edge to have continuity with another surface edge.

Allows selection of more than one edge to match.

Combine two surfaces at untrimmed edges.

Extends or trims two surfaces to where they intersect.

Mirror a copy of a curve or surface with continuity.

Create intermediate surfaces between two input surfaces.

Reconstruct curves, surfaces, and extrusion objects to a specified degree and control point number.

Reconstructs selected surfaces to degree 3, with a specified control point number, in either the u or v direction.

Reduce the number of surface control points.

Change the degree of the polynomial that defines the curve or surface by adding or subtracting control points between knot spans, while maintaining the knot structure.

Restore surface edges to their surface.

Remove trim curves from trimmed surfaces.

Remove trim curves and joined surfaces keeping the trimmed objects.

Contract the underlying untrimmed surface close to trimming boundaries.

Contract the underlying untrimmed surface as close as possible to the trimming boundaries.

Make the object knot vectors uniform without changing the control point locations.

Make the surface knots uniform in u or v direction.

Remove the kink from the start/end of a curve or surface.

Insert a kink at the start/end of a curve or surface.

Change the location where the start and end edges meet on a closed surface.

Untrim selected surface edges and retrim the edges.

Flatten (develop) a surface or polysurface with curvature in one direction to a planar surface.

Project surface edges onto the construction plane to create planar curves.

Flatten a surface without restriction to single-directional curvature.

Adjust the shape of a curve at its end or a surface near an untrimmed edge.

Divide a surface into separate parts at kinks.

Divide a surface into separate parts at creases and tangents.

Remove multiple knots from curves and surfaces.

Evaluate surface curvature using false-color analysis.

Link to Surface Analysis toolbar

Turn off curvature analysis display.

Highlight edges of surfaces and polysurfaces. Displays the Edge Analysis control.

Link to Edge Tools toolbar

Turn off edge display.

Evaluate curve or surface curvature with a graph.

Turn off curvature graph display.

Open the Direction Analysis control and turn on direction analysis for curves, surfaces, and polysurfaces.

Close the Direction Analysis control, and turn off direction analysis.

Reverse the normal direction of a curve, surface, or mesh.

Rhinoceros 6 © 2010-2020 Robert McNeel & Associates. 11-Nov-2020